Mon hélistation
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut à tous,
Je voulais vous présenter en photo mon hélistation que j'ai eu l'occasion de tester cet après midi.
C'est super sympa et c'est jolie.
Voici les photos :



A+.
Ben.
Je voulais vous présenter en photo mon hélistation que j'ai eu l'occasion de tester cet après midi.
C'est super sympa et c'est jolie.
Voici les photos :



A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- joeCool
- Armageddon
- Messages : 14501
- Enregistré le : 16 juin 2008, 22:54
- Localisation : Chalon-sur-Saône
Salut Ben,lagambas @ 24 Jul 2009, à 16:33 a écrit : Je voulais vous présenter en photo mon hélistation que j'ai eu l'occasion de tester cet après midi.
C'est super sympa et c'est jolie.
Magnifique !!!!!!!!!!!!!
Quelle est sont diamètre ? C'est fait maison ???
@+
Joe.









- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Alors là ca fait 1,50m de diamètre. C'est presque un peu gros mais un Trex700 peut décoller dessus ...
Oui c'est en contre plaqué de 19mm d'épaisseur. C'est mon pote ébéniste qui me l'a fait et peint en blanc.
A+.
Ben.
Alors là ca fait 1,50m de diamètre. C'est presque un peu gros mais un Trex700 peut décoller dessus ...
Oui c'est en contre plaqué de 19mm d'épaisseur. C'est mon pote ébéniste qui me l'a fait et peint en blanc.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
-
- Michel Galabru
- Messages : 10859
- Enregistré le : 10 janv. 2008, 20:37
- Localisation : Gaillac 81
- MINOSFOR
- Maître Jedi
- Messages : 3122
- Enregistré le : 01 mai 2009, 02:49
- Localisation : Nantes
TRES JOLIE
C'est vrai qu'atterir sur la plouse defois c'est point trop stable

C'est vrai qu'atterir sur la plouse defois c'est point trop stable

LIEN DIRECTE MINDOU HELICO RC
Hélico jouet : A peu près toutes les conneries qu'ont peut trouver en grande surface, PicooZ Forever
Hélico Birotor: 2 Blade Mcx / Blade CX2 Airwolf
Hélico FP: Walkera CB100
Hélico CP: Belt cp 1 / King 2 / Sphynx 3d / Copterx sev2 / Gaui EP550 / SJM180 / 2 Vario X-TREME Acrobatique
Avions: Jet tiger / piaget F3P / Xtwin sport bilipos et quelques autre miettes.
Ailes: L'inévitable SWIFT pour se passer les nerfs
Bateau: Réplique bateau de guerre / Hors bord maison +70klm/H
Voiture: Mad force / pure ten / Inferno / Truggy
Radio: Futaba T8FG / Graupner MX16 IFS / Graupner MX12 FM
Chargeur: Easymodel / Graupner ultramat 16
Hélico jouet : A peu près toutes les conneries qu'ont peut trouver en grande surface, PicooZ Forever
Hélico Birotor: 2 Blade Mcx / Blade CX2 Airwolf
Hélico FP: Walkera CB100
Hélico CP: Belt cp 1 / King 2 / Sphynx 3d / Copterx sev2 / Gaui EP550 / SJM180 / 2 Vario X-TREME Acrobatique
Avions: Jet tiger / piaget F3P / Xtwin sport bilipos et quelques autre miettes.
Ailes: L'inévitable SWIFT pour se passer les nerfs
Bateau: Réplique bateau de guerre / Hors bord maison +70klm/H
Voiture: Mad force / pure ten / Inferno / Truggy
Radio: Futaba T8FG / Graupner MX16 IFS / Graupner MX12 FM
Chargeur: Easymodel / Graupner ultramat 16
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,Boomslang @ 24 Jul 2009, à 17:47 a écrit :Dis lui à lui alors que c'est du bon boulot. Faignant !!!lagambas @ 24 Jul 2009, à 17:41 a écrit : C'est mon pote ébéniste qui me l'a fait et peint en blanc.
J'ai quand même collé le "H"!!!!!! MDR!!!!


A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- Siddarth
- Geneviève & Fireman
- Messages : 24019
- Enregistré le : 05 sept. 2008, 16:43
- Localisation : Lille (59)
- Contact :
- Marc_30_34
- Chancelier Suprême
- Messages : 546
- Enregistré le : 11 janv. 2009, 20:27
Hm j'espère que ça motivera quelques languedociens à monter voler en Lozère
très beau !

[img]http://goodies.heli4.com/icones/drapo_fr.png[/img] Sommières (30) - 25ans - [b]Padawan de Angels.arael[/b]
[img]http://goodies.heli4.com/icones/fp.png[/img] Compy FP BD
[img]http://goodies.heli4.com/icones/cp.png[/img] T-Rex 450 et HDX450 en montage
[img]http://goodies.heli4.com/icones/radio.png[/img]DX7
[img]http://goodies.heli4.com/icones/fp.png[/img] Compy FP BD
[img]http://goodies.heli4.com/icones/cp.png[/img] T-Rex 450 et HDX450 en montage
[img]http://goodies.heli4.com/icones/radio.png[/img]DX7
- proteus44
- Maître Jedi
- Messages : 4246
- Enregistré le : 29 mai 2009, 08:27
- Localisation : Thouaré (44)
cool c'est pliable ?
Je pensais à un truc similaire qui se plie comme les cartons des jeux de société. En tout cas c'est chouette...
Je pensais à un truc similaire qui se plie comme les cartons des jeux de société. En tout cas c'est chouette...








Brevet de télépilote - (DGAC novembre 2018)
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,proteus44 @ 24 Jul 2009, à 18:06 a écrit : cool c'est pliable ?
Je pensais à un truc similaire qui se plie comme les cartons des jeux de société. En tout cas c'est chouette...
Oui il y a des charnières et ca se plie en deux .... sinon c'est intransportable!!!!
Tu as raison Marc 30 34, qu'est ce qu'il ne faut pas faire pour que certains osent prendre leur voiture!! MDR!!!!



A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,6clique @ 24 Jul 2009, à 18:16 a écrit :Tu est Lozérien ? Je suis de Marvejols et toi ?Marc_30_34 @ 24 Jul 2009, à 17:00 a écrit : Hm j'espère que ça motivera quelques languedociens à monter voler en Lozèretrès beau !
Oui je suis à Marvejols ....
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- Marc_30_34
- Chancelier Suprême
- Messages : 546
- Enregistré le : 11 janv. 2009, 20:27
Perso en Aout ou Septembre, je ne serai pas contre un petit vol en Lozère tant qu'il fait bon. Donc on peut regarder avec le groupe et essayer de monter ça
on se retrouve sur le post dédié 


[img]http://goodies.heli4.com/icones/drapo_fr.png[/img] Sommières (30) - 25ans - [b]Padawan de Angels.arael[/b]
[img]http://goodies.heli4.com/icones/fp.png[/img] Compy FP BD
[img]http://goodies.heli4.com/icones/cp.png[/img] T-Rex 450 et HDX450 en montage
[img]http://goodies.heli4.com/icones/radio.png[/img]DX7
[img]http://goodies.heli4.com/icones/fp.png[/img] Compy FP BD
[img]http://goodies.heli4.com/icones/cp.png[/img] T-Rex 450 et HDX450 en montage
[img]http://goodies.heli4.com/icones/radio.png[/img]DX7
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Oui pas de soucis, c'est vous qui voyez pour monter.
A+.
Ben.
Oui pas de soucis, c'est vous qui voyez pour monter.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- Jazz
- Chancelier Suprême
- Messages : 986
- Enregistré le : 21 sept. 2008, 20:42
- Localisation : Isère 38
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Oui pas mal non plus Jazz.
Je trouvais la mienne presque grande, mais l'avantage c'est que je peux accueillir des grands modèles comme un Trex700.
Ca reste sympa, mais pas toujours facile à transporter.
A+.
Ben.
Oui pas mal non plus Jazz.
Je trouvais la mienne presque grande, mais l'avantage c'est que je peux accueillir des grands modèles comme un Trex700.
Ca reste sympa, mais pas toujours facile à transporter.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- RolluS
- Tuteur - Webmaster
- Messages : 13244
- Enregistré le : 31 déc. 2007, 00:55
- Contact :
Mon plus gros modèle est un 450.
Comme je sais me poser avec précision, sur les spots "accidentés" (chemin de champs caillouteux..), je me pose sur... ma valise radio..
Par contre, je pensais effectivement me faire quelque chose de plus grands pour mes atteros "a cours d'électrons", et là, ta réalisation est très sympa
[Edit] Celle de Jazz aussi
Comme je sais me poser avec précision, sur les spots "accidentés" (chemin de champs caillouteux..), je me pose sur... ma valise radio..
Par contre, je pensais effectivement me faire quelque chose de plus grands pour mes atteros "a cours d'électrons", et là, ta réalisation est très sympa

[Edit] Celle de Jazz aussi

Besoin d'un tuteur? (¯`·._. ★ RolluS Academy ★ ._.·´¯)
Ma page perso: (¯`·._. RolluS Zone ._.·´¯)




- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,TOY07 @ 25 Jul 2009, à 12:22 a écrit : Salut à tous![]()
Il ne manque plus que les spots lumineux pour les atteros de nuit![]()
a+
TOY07
J'y avais pensé, mais là ca fait peut être beaucoup .... quoi que ....

A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- rhamkota
- Chevalier Jedi
- Messages : 1570
- Enregistré le : 15 mars 2009, 23:13
- Localisation : Bégard 22
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Oui mais moins facile pour le transport ensuite.
Mais je vais regarder pour le fun!!!
Que faut il faire pour faire clignoter?? J'y connais pas grand chose dans ce domaine??
A+.
Ben.
Oui mais moins facile pour le transport ensuite.
Mais je vais regarder pour le fun!!!
Que faut il faire pour faire clignoter?? J'y connais pas grand chose dans ce domaine??
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- rhamkota
- Chevalier Jedi
- Messages : 1570
- Enregistré le : 15 mars 2009, 23:13
- Localisation : Bégard 22
- toftof62
- Chevalier Jedi
- Messages : 1649
- Enregistré le : 23 sept. 2008, 18:40
- Localisation : pas de calais
tres bon boulot et propre j'y avais penser a m'en faire un mais avec le dessu de la table ronde de mon salon
mais ma femme ne sera pas du méme avis 


micro aito . aito v2. slid'air by easy-heli.com. radio dx7 mode1
chargeur turnigy accu6
trex 450 pro avec 250 align trex600 nitro pas de calais 35 ans
http://goodies.heli4.com/icones/drapo_fr.png
chargeur turnigy accu6
trex 450 pro avec 250 align trex600 nitro pas de calais 35 ans
http://goodies.heli4.com/icones/drapo_fr.png
- ced38
- Chevalier Jedi
- Messages : 1222
- Enregistré le : 05 oct. 2008, 14:19
- Localisation : Lyon (Pont de chéruy)
-
- Maître Jedi
- Messages : 4276
- Enregistré le : 18 sept. 2008, 10:44
- Localisation : Laval (53)
Pour que sa clignote, tu prends un systeme qui clignote deja, genre porte clef lumineux ou autre...lagambas @ 25 Jul 2009, à 18:00 a écrit : Salut,
Oui mais moins facile pour le transport ensuite.
Mais je vais regarder pour le fun!!!
Que faut il faire pour faire clignoter?? J'y connais pas grand chose dans ce domaine??
A+.
Ben.
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,perrus53 @ 25 Jul 2009, à 20:55 a écrit : Pour que sa clignote, tu prends un systeme qui clignote deja, genre porte clef lumineux ou autre...
Là je vois pas trop, si tu as des liens je suis preneur.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
-
- Chancelier Suprême
- Messages : 666
- Enregistré le : 30 mai 2009, 23:12
Super projet !
L'idée des led peut etre super sympa, il faut que je regarde les publicité du genre l'idle ou aldi où ils vendent des truc qui sert a rien.
edit:
voila, j'ai trouvé ça
2 ieme edit:
sinon, quand tu achètes un vélo, il fournisse des lampes a accrocher sur le guidon et derrière sur la selle, il y en a rouge et blanche
L'idée des led peut etre super sympa, il faut que je regarde les publicité du genre l'idle ou aldi où ils vendent des truc qui sert a rien.
edit:
voila, j'ai trouvé ça
2 ieme edit:

sinon, quand tu achètes un vélo, il fournisse des lampes a accrocher sur le guidon et derrière sur la selle, il y en a rouge et blanche
- ced38
- Chevalier Jedi
- Messages : 1222
- Enregistré le : 05 oct. 2008, 14:19
- Localisation : Lyon (Pont de chéruy)
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Merci à tous pour vos recherches.
Je vois que ce post inspire pas mal de monde quand même.
Je continue de mon coté et j'ai trouvé des choses inétressantes et prêt à l'emploi, mais les tarifs ne sont pas donnés!!
Continuez à donner vos idées.
A+.
Ben.
Merci à tous pour vos recherches.
Je vois que ce post inspire pas mal de monde quand même.
Je continue de mon coté et j'ai trouvé des choses inétressantes et prêt à l'emploi, mais les tarifs ne sont pas donnés!!
Continuez à donner vos idées.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- scorpio59
- Chevalier Jedi
- Messages : 1618
- Enregistré le : 22 mai 2008, 18:39
- Contact :
Salut,
Pas mal ta réalisation, moi de mon côté, j'ai pris un touret que j'ai recouvert de coroplast (support de pub) dans les mêmes dimensions que le tien et ça va du tonnerre, le seul inconvénient est que je dois le laisser sur place (masse de l'objet).
A+
Pas mal ta réalisation, moi de mon côté, j'ai pris un touret que j'ai recouvert de coroplast (support de pub) dans les mêmes dimensions que le tien et ça va du tonnerre, le seul inconvénient est que je dois le laisser sur place (masse de l'objet).
A+
DX7 - 22 ans - Dunkerque
Logo 600se Vbar - Scorpion HK-4035 500kv - YGE120hv - 12S - 3xDS610 - DS650 - 693's edge & 105 tail blades - Beastx - AR7000
Logo 600se Vbar - Scorpion HK-4035 500kv - YGE120hv - 12S - 3xDS610 - DS650 - 693's edge & 105 tail blades - Beastx - AR7000
-
- Maître Jedi
- Messages : 4276
- Enregistré le : 18 sept. 2008, 10:44
- Localisation : Laval (53)
LE touret complet?scorpio59 @ 26 Jul 2009, à 00:08 a écrit : Salut,
Pas mal ta réalisation, moi de mon côté, j'ai pris un touret que j'ai recouvert de coroplast (support de pub) dans les mêmes dimensions que le tien et ça va du tonnerre, le seul inconvénient est que je dois le laisser sur place (masse de l'objet).
A+
Chaud, si tu le loupes sa fait mal!!
- scorpio59
- Chevalier Jedi
- Messages : 1618
- Enregistré le : 22 mai 2008, 18:39
- Contact :
Non simplement un côtéperrus53 @ 26 Jul 2009, à 00:07 a écrit :LE touret complet?scorpio59 @ 26 Jul 2009, à 00:08 a écrit : Salut,
Pas mal ta réalisation, moi de mon côté, j'ai pris un touret que j'ai recouvert de coroplast (support de pub) dans les mêmes dimensions que le tien et ça va du tonnerre, le seul inconvénient est que je dois le laisser sur place (masse de l'objet).
A+
Chaud, si tu le loupes sa fait mal!!

DX7 - 22 ans - Dunkerque
Logo 600se Vbar - Scorpion HK-4035 500kv - YGE120hv - 12S - 3xDS610 - DS650 - 693's edge & 105 tail blades - Beastx - AR7000
Logo 600se Vbar - Scorpion HK-4035 500kv - YGE120hv - 12S - 3xDS610 - DS650 - 693's edge & 105 tail blades - Beastx - AR7000
-
- Maître Jedi
- Messages : 4276
- Enregistré le : 18 sept. 2008, 10:44
- Localisation : Laval (53)
A ouai pas malscorpio59 @ 26 Jul 2009, à 01:33 a écrit :Non simplement un côtéperrus53 @ 26 Jul 2009, à 00:07 a écrit :LE touret complet?scorpio59 @ 26 Jul 2009, à 00:08 a écrit : Salut,
Pas mal ta réalisation, moi de mon côté, j'ai pris un touret que j'ai recouvert de coroplast (support de pub) dans les mêmes dimensions que le tien et ça va du tonnerre, le seul inconvénient est que je dois le laisser sur place (masse de l'objet).
A+
Chaud, si tu le loupes sa fait mal!!![]()

-
- Chancelier Suprême
- Messages : 666
- Enregistré le : 30 mai 2009, 23:12
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Je suis content de voir que mon post que je croyais un peu naze au départ inspire autant de monde.
J'ai trouvé hier soir pas mal de systèmes de led déjà tout prêt.
Mais le coût va avec, on arrive pour avoir 10 leds à 70 pour certains systèmes ....
J'en ai d'autres mais il faut que j'appel les boutiques pour connaître les fonctions exactes!!
Scorpio => Pas mal de ton coté, mais pour ma part, le but était que ca soit transportable.
A+.
Ben.
Je suis content de voir que mon post que je croyais un peu naze au départ inspire autant de monde.
J'ai trouvé hier soir pas mal de systèmes de led déjà tout prêt.
Mais le coût va avec, on arrive pour avoir 10 leds à 70 pour certains systèmes ....
J'en ai d'autres mais il faut que j'appel les boutiques pour connaître les fonctions exactes!!
Scorpio => Pas mal de ton coté, mais pour ma part, le but était que ca soit transportable.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- rhamkota
- Chevalier Jedi
- Messages : 1570
- Enregistré le : 15 mars 2009, 23:13
- Localisation : Bégard 22
il t'en faut que 4 led comme celui ci
http://www.youtube.com/watch?v=0mV00r1Ls2c&hl=fr" onclick="window.open(this.href);return false;
++
http://www.youtube.com/watch?v=0mV00r1Ls2c&hl=fr" onclick="window.open(this.href);return false;
++
Qui est en ligne
Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 1 invité