[Tuteur Angels.arael] - Full
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Bienvenue à toi geodaff sur ce post de tutorat.
Oui angels un TRex de plus ... TRex power!!!
A+.
Ben.
Bienvenue à toi geodaff sur ce post de tutorat.
Oui angels un TRex de plus ... TRex power!!!
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Bon hier encore 3 lipos de vidées.
Je crois qu'il va falloir que je réduise mon temps de vol car là un faisant plus de translations que de stationnaires ca consomme plus ... du coup hier je suis arrivé en coupure ESC sur la dernière batterie. Pas bon pour la lipo tout ca.
Je compte sur mon "bon" chargeur pour me la remettre aux petits oignons.
Et toujours pas de photos en vol ni de vidéos!!!!!!!
A+.
Ben.
Bon hier encore 3 lipos de vidées.
Je crois qu'il va falloir que je réduise mon temps de vol car là un faisant plus de translations que de stationnaires ca consomme plus ... du coup hier je suis arrivé en coupure ESC sur la dernière batterie. Pas bon pour la lipo tout ca.
Je compte sur mon "bon" chargeur pour me la remettre aux petits oignons.
Et toujours pas de photos en vol ni de vidéos!!!!!!!
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- Angels.arael
- Lipo gonflant
- Messages : 3521
- Enregistré le : 20 nov. 2007, 18:52
- Localisation : Narbonne
- Contact :
alors moi je te conseille de voler au chronomètre
tu le met sur le manche de gaz a 30% sur la T10 tu verra ça marche bien
moi je suis en high sur l esc pour la tension de lipo du coup ca me le signal a 80% de la lipo si mon chrono n as pas encore sonné
tu verra en voltige cad en idle up tu volera encore moins longtemps ...
tu le met sur le manche de gaz a 30% sur la T10 tu verra ça marche bien
moi je suis en high sur l esc pour la tension de lipo du coup ca me le signal a 80% de la lipo si mon chrono n as pas encore sonné
tu verra en voltige cad en idle up tu volera encore moins longtemps ...
[img]http://img36.imageshack.us/img36/4659/bannieresteph.png[/img]
- Tuteur sur Heli4.com depuis le 26 Août 2008 [Edit de Bioris]
- Tuteur sur Heli4.com depuis le 26 Août 2008 [Edit de Bioris]
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Je te remet ce que j'ai posté sur le topic du TRex 600.
Pour moi petit vol cet après midi et pour une fois j'avais quelqu'un pour me faire quelques photos ... enfin!!
Voici donc le lien de l'album :
Mon vol TRex 600
A+.
Ben.
Je te remet ce que j'ai posté sur le topic du TRex 600.
Pour moi petit vol cet après midi et pour une fois j'avais quelqu'un pour me faire quelques photos ... enfin!!
Voici donc le lien de l'album :
Mon vol TRex 600
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- Angels.arael
- Lipo gonflant
- Messages : 3521
- Enregistré le : 20 nov. 2007, 18:52
- Localisation : Narbonne
- Contact :
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Là c'est sur il n'y a pas photo, c'est le cas de le dire ... quel plaisir cette machine.
Me reste encore a améliorer le pilotage, mais ca je prend mon temps pour éviter de tout casser. Pour le moment c'est tout bon, que du bonheur.
A+.
Ben.
Là c'est sur il n'y a pas photo, c'est le cas de le dire ... quel plaisir cette machine.
Me reste encore a améliorer le pilotage, mais ca je prend mon temps pour éviter de tout casser. Pour le moment c'est tout bon, que du bonheur.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- Angels.arael
- Lipo gonflant
- Messages : 3521
- Enregistré le : 20 nov. 2007, 18:52
- Localisation : Narbonne
- Contact :
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
J'avais vu ta vidéo.
Là j'en suis pas encore là .... mais c'est beau à voir en tous cas. Chapeau.
A+.
Ben.
J'avais vu ta vidéo.
Là j'en suis pas encore là .... mais c'est beau à voir en tous cas. Chapeau.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- Angels.arael
- Lipo gonflant
- Messages : 3521
- Enregistré le : 20 nov. 2007, 18:52
- Localisation : Narbonne
- Contact :
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Bon encore et toujours mes soucis d'autonomie d'accu de la RC!!!!
Ils me l'ont changé par un accu neuf ... et rebelotte, 3 LIPOS et plus de batterie!!!
C'est incroyable.
Est ce que ca peu venir de mon chargeur tout simplement qui ne chargerait pas correctement?? Mais après charge je suis sur la RC à 11,5V donc ca semble bon!!!
La radio ca ne vient pas de là car pendant l'échange d'accu, on m'avait prété un accu fait maison en attendant. Et bien j'ai fais 6 LIPOS et vidé seulement 0,5V, soit presque rien ...
As tu une idée??
A+.
Ben.
Bon encore et toujours mes soucis d'autonomie d'accu de la RC!!!!
Ils me l'ont changé par un accu neuf ... et rebelotte, 3 LIPOS et plus de batterie!!!
C'est incroyable.
Est ce que ca peu venir de mon chargeur tout simplement qui ne chargerait pas correctement?? Mais après charge je suis sur la RC à 11,5V donc ca semble bon!!!
La radio ca ne vient pas de là car pendant l'échange d'accu, on m'avait prété un accu fait maison en attendant. Et bien j'ai fais 6 LIPOS et vidé seulement 0,5V, soit presque rien ...
As tu une idée??
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- Angels.arael
- Lipo gonflant
- Messages : 3521
- Enregistré le : 20 nov. 2007, 18:52
- Localisation : Narbonne
- Contact :
quel autonomie ton pack ? et quel autonomie celui que l on ta prêter ?
donne les indications de ton chargeur
la tension veut rien dire une batterie de voiture peu être a 12V et ça ne démarrera pas
donne les indications de ton chargeur
la tension veut rien dire une batterie de voiture peu être a 12V et ça ne démarrera pas
[img]http://img36.imageshack.us/img36/4659/bannieresteph.png[/img]
- Tuteur sur Heli4.com depuis le 26 Août 2008 [Edit de Bioris]
- Tuteur sur Heli4.com depuis le 26 Août 2008 [Edit de Bioris]
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Voilà mon chargeur :
chargeur
Actuellement autonomie 30 min.
Celui qu'on m'avait passé je ne sais pas au total car je l'ai rendu quand j'ai récupéré cette batterie de chez avio et tiger, mais k'autre j'avais fais près d'une heure de vol et presque rien de déchargé!!
Là je pige pas tout??
A+.
Ben.
Voilà mon chargeur :
chargeur
Actuellement autonomie 30 min.
Celui qu'on m'avait passé je ne sais pas au total car je l'ai rendu quand j'ai récupéré cette batterie de chez avio et tiger, mais k'autre j'avais fais près d'une heure de vol et presque rien de déchargé!!
Là je pige pas tout??
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- Angels.arael
- Lipo gonflant
- Messages : 3521
- Enregistré le : 20 nov. 2007, 18:52
- Localisation : Narbonne
- Contact :
ok bon tu charge a 1h ca dure 30min a 0.5A ça dure 1h je te conseil de laisser la radio allumer et de décharger presque entièrement l accus comme c'est un 2500mah a 0.1A ça doit durée 25H si ça coupe avant ton chargeur déconne charger les nimh trop vite c'est pas bon
[img]http://img36.imageshack.us/img36/4659/bannieresteph.png[/img]
- Tuteur sur Heli4.com depuis le 26 Août 2008 [Edit de Bioris]
- Tuteur sur Heli4.com depuis le 26 Août 2008 [Edit de Bioris]
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
OK je vais essayer ca pour voir.
A+.
Ben.
OK je vais essayer ca pour voir.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- stefys
- Colonel
- Messages : 280
- Enregistré le : 25 mai 2008, 10:36
- Localisation : Béziers
- Contact :
Bonjour Stephane
je viens de découvrir le principe du tuteur
et j'avoue que ce principe est sympa pour les débutants
mon cas est un peut spécial,je sais...
mais tu me parrais etre un gars trés dévoué à la cause T-REX
WHAT ELSE comme tu dis
Je dirais de moi que je suis poli,pas agressif,
je sens pas des pieds,et je bois les conseils sans modération
donc pour assurer ma réussite ,et débuter...enfin
accepterais tu d'etre mon tuteur?
cordialement
Stephane de LRM
je viens de découvrir le principe du tuteur
et j'avoue que ce principe est sympa pour les débutants
mon cas est un peut spécial,je sais...
mais tu me parrais etre un gars trés dévoué à la cause T-REX
WHAT ELSE comme tu dis
Je dirais de moi que je suis poli,pas agressif,
je sens pas des pieds,et je bois les conseils sans modération
donc pour assurer ma réussite ,et débuter...enfin
accepterais tu d'etre mon tuteur?
cordialement
Stephane de LRM
[b] ARRET AERO HELICO CAUSE SANTE [/b]
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Ca serait peut être pas mal si tu ajoutais pour notre tuteur préféré quel machine tu possèdes et quel es ton niveau ... ca lui évitera d'aller dans la rubrique présentation.
Sinon je pense qu'il t'accueillera à bras ouvert et bienvenue.
A+.
Ben.
Ca serait peut être pas mal si tu ajoutais pour notre tuteur préféré quel machine tu possèdes et quel es ton niveau ... ca lui évitera d'aller dans la rubrique présentation.
Sinon je pense qu'il t'accueillera à bras ouvert et bienvenue.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- stefys
- Colonel
- Messages : 280
- Enregistré le : 25 mai 2008, 10:36
- Localisation : Béziers
- Contact :
- Angels.arael
- Lipo gonflant
- Messages : 3521
- Enregistré le : 20 nov. 2007, 18:52
- Localisation : Narbonne
- Contact :
- stefys
- Colonel
- Messages : 280
- Enregistré le : 25 mai 2008, 10:36
- Localisation : Béziers
- Contact :
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Cool alors ... et si en plus tu le connais c'est encore mieux!! Tu es vers Montpellier???
A+.
Ben.
Cool alors ... et si en plus tu le connais c'est encore mieux!! Tu es vers Montpellier???
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- stefys
- Colonel
- Messages : 280
- Enregistré le : 25 mai 2008, 10:36
- Localisation : Béziers
- Contact :
Salut Ben
na,Beziers
tu peux peut etre m'aiguiller
j'ai 3 lipo en 1800
une mistery,et 2 d'origine(celle livrée avec le trex))
comme je dois en commander aux moins deux autres
et que je ne veut pas déranger notre tuteur favoris
il doit boire son café OLE
que me conseille tu de prendre,marque , lien
j'avais penser à des 2200 en 3S 25/30C
qu'en penses tu ?
@+
na,Beziers
tu peux peut etre m'aiguiller
j'ai 3 lipo en 1800
une mistery,et 2 d'origine(celle livrée avec le trex))
comme je dois en commander aux moins deux autres
et que je ne veut pas déranger notre tuteur favoris
il doit boire son café OLE
que me conseille tu de prendre,marque , lien
j'avais penser à des 2200 en 3S 25/30C
qu'en penses tu ?
@+
[b] ARRET AERO HELICO CAUSE SANTE [/b]
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Là je ne voudrais pas dire de bétises.
Je n'ai pas de TRex450, mais pour le belt cp qui a la même taille je mettais des 2100.
Je suppose donc que des 2200 doivent être bien pour l'équilibrage de l'appareil, mais je n'en sais pas plus.
Ensuite des 25 ou 30 c'est le top à ce niveau là.
Mais là, notre maitre en sait beaucoup plus que nous ....
A+.
Ben.
Là je ne voudrais pas dire de bétises.
Je n'ai pas de TRex450, mais pour le belt cp qui a la même taille je mettais des 2100.
Je suppose donc que des 2200 doivent être bien pour l'équilibrage de l'appareil, mais je n'en sais pas plus.
Ensuite des 25 ou 30 c'est le top à ce niveau là.
Mais là, notre maitre en sait beaucoup plus que nous ....
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- stefys
- Colonel
- Messages : 280
- Enregistré le : 25 mai 2008, 10:36
- Localisation : Béziers
- Contact :
- Angels.arael
- Lipo gonflant
- Messages : 3521
- Enregistré le : 20 nov. 2007, 18:52
- Localisation : Narbonne
- Contact :
Helico regler ce dimanche
gelere le telebee obligé de le mettre sur la tranche pour qu il regule dans le bon sens...
Lagambas ton pb avec ton accus de reception est resolu ?
gelere le telebee obligé de le mettre sur la tranche pour qu il regule dans le bon sens...
Lagambas ton pb avec ton accus de reception est resolu ?
[img]http://img36.imageshack.us/img36/4659/bannieresteph.png[/img]
- Tuteur sur Heli4.com depuis le 26 Août 2008 [Edit de Bioris]
- Tuteur sur Heli4.com depuis le 26 Août 2008 [Edit de Bioris]
- stefys
- Colonel
- Messages : 280
- Enregistré le : 25 mai 2008, 10:36
- Localisation : Béziers
- Contact :
Salut,
ben finalement,c'est moi qui me soude les prises Dean T
Yvon à eu un empechement.
j'ai donc investi sur un bon fer à souder de 60 w
car ceux que j'ai ne chauffent pas assez
et de l'étain à ames décapantes
dépolissage des fiches pour que ça accroche
étamage fiches,et fils,je soude
vérification,puis mise en place de la thermo-rétractable
je pense avoir bien procéder...
pas d'entrainement cette semaine
meme pas le tems d'un simu,sur booké
cordialement
ben finalement,c'est moi qui me soude les prises Dean T
Yvon à eu un empechement.
j'ai donc investi sur un bon fer à souder de 60 w
car ceux que j'ai ne chauffent pas assez
et de l'étain à ames décapantes
dépolissage des fiches pour que ça accroche
étamage fiches,et fils,je soude
vérification,puis mise en place de la thermo-rétractable
je pense avoir bien procéder...
pas d'entrainement cette semaine
meme pas le tems d'un simu,sur booké
cordialement
[b] ARRET AERO HELICO CAUSE SANTE [/b]
- Angels.arael
- Lipo gonflant
- Messages : 3521
- Enregistré le : 20 nov. 2007, 18:52
- Localisation : Narbonne
- Contact :
- stefys
- Colonel
- Messages : 280
- Enregistré le : 25 mai 2008, 10:36
- Localisation : Béziers
- Contact :
ça fly pour jeudi, ça tombe bien
moi aussi je n'y serais pas
et demain je vais juste au terrain porter mes papiers pour la licence
sans le T-REX tu comprends pourquoi...
pour le scratch sur les lipos
tu le colle à l'époxy,ou au double face ? (celui pour moquette)
A+ maestro
moi aussi je n'y serais pas
et demain je vais juste au terrain porter mes papiers pour la licence
sans le T-REX tu comprends pourquoi...
pour le scratch sur les lipos
tu le colle à l'époxy,ou au double face ? (celui pour moquette)
A+ maestro
[b] ARRET AERO HELICO CAUSE SANTE [/b]
- Angels.arael
- Lipo gonflant
- Messages : 3521
- Enregistré le : 20 nov. 2007, 18:52
- Localisation : Narbonne
- Contact :
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
En fait c'est l'accu qui est dans la RC qui me pose soucis ...
J'avais envoyé le précédent en garantie.
Pendant ce temps là un pote m'avait passé un accu bricolé pour pouvoir voler en attendant ... et impec ca se vidait très lentement. Ce qui prouve que ca ne venait pas de la radio!!
J'en ai recu ensuite un nouveau par la poste et bien figures toi qu'il se décharge aussi vite que le premier.
Ce qui me laisse supposer qu'en fait c'est mon chargeur qui ne doit pas bien charger!!!! Comme je charge sur la prise de la RC sans retirer l'accu je suppose que la charge ne se fait pas correctement??
Un pote doit me tester l'accu seul, mais j'ai pas eu le temps de lui passer ....
En attendant il m'a reprété ses vieux accus!!
Voilà ou j'en suis , mais pas eu le temps de voler ces dernières semaines ...
A+.
Ben.
En fait c'est l'accu qui est dans la RC qui me pose soucis ...
J'avais envoyé le précédent en garantie.
Pendant ce temps là un pote m'avait passé un accu bricolé pour pouvoir voler en attendant ... et impec ca se vidait très lentement. Ce qui prouve que ca ne venait pas de la radio!!
J'en ai recu ensuite un nouveau par la poste et bien figures toi qu'il se décharge aussi vite que le premier.
Ce qui me laisse supposer qu'en fait c'est mon chargeur qui ne doit pas bien charger!!!! Comme je charge sur la prise de la RC sans retirer l'accu je suppose que la charge ne se fait pas correctement??
Un pote doit me tester l'accu seul, mais j'ai pas eu le temps de lui passer ....
En attendant il m'a reprété ses vieux accus!!
Voilà ou j'en suis , mais pas eu le temps de voler ces dernières semaines ...
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- stefys
- Colonel
- Messages : 280
- Enregistré le : 25 mai 2008, 10:36
- Localisation : Béziers
- Contact :
- stefys
- Colonel
- Messages : 280
- Enregistré le : 25 mai 2008, 10:36
- Localisation : Béziers
- Contact :
Chalut des News
1°-- je viens de me manger 3 heures de simu
avec mon z'oeil...
2°-sans oublier de faire la pause gouter à 16 heures
(trés important)
et pour l'instant le statio en ligne est joli...c'est un sentiment agréable,meme si...
le chemin est encore trés long ( especially for me )
3°-ben demain,en fonction du temps, je vais tacher
de mettre en application avec le tresx
en y allant tout doux sur les gaz
voilà cher tuteur ma progress
un pdwn heureux de notre collaborations merci
''STEFYS''
1°-- je viens de me manger 3 heures de simu
avec mon z'oeil...
2°-sans oublier de faire la pause gouter à 16 heures
(trés important)
et pour l'instant le statio en ligne est joli...c'est un sentiment agréable,meme si...
le chemin est encore trés long ( especially for me )
3°-ben demain,en fonction du temps, je vais tacher
de mettre en application avec le tresx
en y allant tout doux sur les gaz
voilà cher tuteur ma progress
un pdwn heureux de notre collaborations merci
''STEFYS''
[b] ARRET AERO HELICO CAUSE SANTE [/b]
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Bien ca.
Perso je pense que pour prendre les bons réflexes il n'y a rien de tel que de faire beaucoup de simu.
C'est comme ca que j'ai évité pas mal de casse de mon coté en commencant seul avec un CP ...
A+.
Ben.
Bien ca.
Perso je pense que pour prendre les bons réflexes il n'y a rien de tel que de faire beaucoup de simu.
C'est comme ca que j'ai évité pas mal de casse de mon coté en commencant seul avec un CP ...
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Bonne nouvelle, j'ai enfin pu mettre en ligne une vidéo ....
VIDEO TREX 600
A+.
Ben.
Bonne nouvelle, j'ai enfin pu mettre en ligne une vidéo ....
VIDEO TREX 600
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- stefys
- Colonel
- Messages : 280
- Enregistré le : 25 mai 2008, 10:36
- Localisation : Béziers
- Contact :
- Angels.arael
- Lipo gonflant
- Messages : 3521
- Enregistré le : 20 nov. 2007, 18:52
- Localisation : Narbonne
- Contact :
- stefys
- Colonel
- Messages : 280
- Enregistré le : 25 mai 2008, 10:36
- Localisation : Béziers
- Contact :
- Angels.arael
- Lipo gonflant
- Messages : 3521
- Enregistré le : 20 nov. 2007, 18:52
- Localisation : Narbonne
- Contact :
- stefys
- Colonel
- Messages : 280
- Enregistré le : 25 mai 2008, 10:36
- Localisation : Béziers
- Contact :
Bonsoir
désolé pour l'indor et le terrai,mais grosse crève qui me met à plat
La bonne nouvelle du jour,car je redoutais un peu...
ca se passait dans ma boite aux lettres
l'obtention de ma première licence fédérale 2009
des passionnés
s'interrogeaient sur l'obtention de celle-ci par rapport
à la délivrance du certificat médical
mon medecin,et sans connivence,me la rempli comme suit
ne présente aucune contre indication pour la pratique
de l'aéromodélisme,présence aide souhaitée
ce qui devrait encourager,les futurs membres de clubs affiliés
FFAM dans un cas similaire pour leurs démarches
et vaincre une certaines timidité
cordialement
''STEFYS''
désolé pour l'indor et le terrai,mais grosse crève qui me met à plat
La bonne nouvelle du jour,car je redoutais un peu...
ca se passait dans ma boite aux lettres
l'obtention de ma première licence fédérale 2009
des passionnés
s'interrogeaient sur l'obtention de celle-ci par rapport
à la délivrance du certificat médical
mon medecin,et sans connivence,me la rempli comme suit
ne présente aucune contre indication pour la pratique
de l'aéromodélisme,présence aide souhaitée
ce qui devrait encourager,les futurs membres de clubs affiliés
FFAM dans un cas similaire pour leurs démarches
et vaincre une certaines timidité
cordialement
''STEFYS''
[b] ARRET AERO HELICO CAUSE SANTE [/b]
- jeff-ch66
- Chevalier Jedi
- Messages : 1626
- Enregistré le : 18 déc. 2008, 00:14
- Localisation : 1029 Villars-Ste-Croix / suisse
Hello...
Je vient de faire l'achat du Trex 600 ESP avec Futaba 9c....
J'ai Demainder de l'aide a Hym pour la config de ma Futaba, et il ma dit de prendre contacte avec toi. et que je sois ton padawan.
Je vol deja avec des V4 Extrem et Belt CP version carbone et eclairage de nuit ( canopy + Pale + Led de positionement )
Il me faudrait de l'aide pour le reglage de ma Futaba.
Je vient de faire l'achat du Trex 600 ESP avec Futaba 9c....
J'ai Demainder de l'aide a Hym pour la config de ma Futaba, et il ma dit de prendre contacte avec toi. et que je sois ton padawan.
Je vol deja avec des V4 Extrem et Belt CP version carbone et eclairage de nuit ( canopy + Pale + Led de positionement )
Il me faudrait de l'aide pour le reglage de ma Futaba.
Vaud - Lausanne - Villars-Ste-Croix - un super coin en face du mont-blanc....
Avec plein de truc qui vole et qui font du bruit.... ( ma signature serait trop longue...)
Mon site perso http://helico.hobby-site.com
>>>Ex. Padawan de Angels.arael <<<
Avec plein de truc qui vole et qui font du bruit.... ( ma signature serait trop longue...)
Mon site perso http://helico.hobby-site.com
>>>Ex. Padawan de Angels.arael <<<
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Petit coucou.
Je n'ai pas déserté, mais pas trop de temps ces jours ci!!!
De plus la météo n'est pas du tout favorable par chez moi pour voler!!!
A+.
Ben.
Petit coucou.
Je n'ai pas déserté, mais pas trop de temps ces jours ci!!!
De plus la météo n'est pas du tout favorable par chez moi pour voler!!!
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
Qui est en ligne
Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 1 invité