oxy 3 vos configurations
- lolo63
- DARK VADOR
- Messages : 6342
- Enregistré le : 13 mars 2013, 22:34
- Localisation : CLERMONT-FERRAND
oxy 3 vos configurations
bonjour à tous,
je vous propose de poster ici les configurations que vous allez avoir (ou que vous avez )sur vos machines.
-Moteur/pignon:
-ESC:
-Lipo(s):
-Servos cyclique:
-Servo AC:
-Gyro:
-Pales principales:
-Pales AC:
Sbec:
comme ça vous avez plus qu'a copier/coller et compléter
je vous propose de poster ici les configurations que vous allez avoir (ou que vous avez )sur vos machines.
-Moteur/pignon:
-ESC:
-Lipo(s):
-Servos cyclique:
-Servo AC:
-Gyro:
-Pales principales:
-Pales AC:
Sbec:
comme ça vous avez plus qu'a copier/coller et compléter
padawan de steph66
Clermont-Ferrand (63) 32 ans
DX1Ot monomanche
Ultramat 16, powerpeak twin,Icharger 4010 Duo avec alim maison .
Next
:
Nano CPX;Trex150
OXY3;Goblin 380 => eznov neuron
Goblin 700 => neuron
Oxy3 qube =>beastX
OXY rep/Lynx team pilot
Clermont-Ferrand (63) 32 ans
DX1Ot monomanche
Ultramat 16, powerpeak twin,Icharger 4010 Duo avec alim maison .
Next
:
Nano CPX;Trex150
OXY3;Goblin 380 => eznov neuron
Goblin 700 => neuron
Oxy3 qube =>beastX
OXY rep/Lynx team pilot
- lolo63
- DARK VADOR
- Messages : 6342
- Enregistré le : 13 mars 2013, 22:34
- Localisation : CLERMONT-FERRAND
Re: oxy 3 vos configurations
voici ce que sera probablement la mienne:
-Moteur/pignon: EOX 2214 - 4100 KV (du kit) pignon 11
-ESC:hobbywing 40A (du kit)
-Lipo(s): 4S 1300 25C zippy compact
-Servos cyclique: 3x KDS N300
-Servo AC: TGY 306
-Gyro:Beastx V3
-Pales principales: CF 255 Zeal (du kit)
-Pales AC: lynx plastic 47 et 50 mm (du kit)
bec: celui du hobbywing
pour le moment ce n'est que provisoire .... je vais tester comme ça la bécane, et on verra
-Moteur/pignon: EOX 2214 - 4100 KV (du kit) pignon 11
-ESC:hobbywing 40A (du kit)
-Lipo(s): 4S 1300 25C zippy compact
-Servos cyclique: 3x KDS N300
-Servo AC: TGY 306
-Gyro:Beastx V3
-Pales principales: CF 255 Zeal (du kit)
-Pales AC: lynx plastic 47 et 50 mm (du kit)
bec: celui du hobbywing
pour le moment ce n'est que provisoire .... je vais tester comme ça la bécane, et on verra
Modifié en dernier par lolo63 le 20 févr. 2015, 00:06, modifié 1 fois.
padawan de steph66
Clermont-Ferrand (63) 32 ans
DX1Ot monomanche
Ultramat 16, powerpeak twin,Icharger 4010 Duo avec alim maison .
Next
:
Nano CPX;Trex150
OXY3;Goblin 380 => eznov neuron
Goblin 700 => neuron
Oxy3 qube =>beastX
OXY rep/Lynx team pilot
Clermont-Ferrand (63) 32 ans
DX1Ot monomanche
Ultramat 16, powerpeak twin,Icharger 4010 Duo avec alim maison .
Next
:
Nano CPX;Trex150
OXY3;Goblin 380 => eznov neuron
Goblin 700 => neuron
Oxy3 qube =>beastX
OXY rep/Lynx team pilot
- loki
- DETRAQUEUR
- Messages : 8842
- Enregistré le : 20 déc. 2012, 08:27
Re: oxy 3 vos configurations
Alors j'éditerais au fur et à mesure:
-Moteur/pignon: Motor EOX 2214 V2 - 4100KV Back Edition / pignon 11 du kit
-ESC:ESC 40A Hobbywing OEM OXY3
-Lipo(s): Nanotech 1300 mAh 4s
-Servos cyclique: DS92A+
-Servo AC: DS95i
-Gyro: microbeast+ et sat spectrum
-Pales principales: CF 255 Zeal (du kit)
-Pales AC: lynx plastic 47 mm(du kit)
Sbec: celui du hobbywing
-Moteur/pignon: Motor EOX 2214 V2 - 4100KV Back Edition / pignon 11 du kit
-ESC:ESC 40A Hobbywing OEM OXY3
-Lipo(s): Nanotech 1300 mAh 4s
-Servos cyclique: DS92A+
-Servo AC: DS95i
-Gyro: microbeast+ et sat spectrum
-Pales principales: CF 255 Zeal (du kit)
-Pales AC: lynx plastic 47 mm(du kit)
Sbec: celui du hobbywing
Modifié en dernier par loki le 17 févr. 2015, 10:58, modifié 1 fois.
- Gloom
- Chevalier Jedi
- Messages : 1763
- Enregistré le : 10 janv. 2009, 21:53
- Localisation : WITTENHEIM (Haut-Rhin)
Re: oxy 3 vos configurations
Hello,
Voilou ma config
-Moteur/pignon: Motor EOX 2214 V2 - 4100KV Back Edition
-ESC:ESC YGE60
-Lipo(s): EOX Ultra Lipo Battery Pack 3S - 1400mAh
-Servos cyclique:KST215MG
-Servo AC:MKS95i
-Gyro: minivbar
-Pales principales: CF 255 Zeal (du kit)
-Pales AC: lynx plastic 47 et 50 mm (du kit)
@+
Voilou ma config
-Moteur/pignon: Motor EOX 2214 V2 - 4100KV Back Edition
-ESC:ESC YGE60
-Lipo(s): EOX Ultra Lipo Battery Pack 3S - 1400mAh
-Servos cyclique:KST215MG
-Servo AC:MKS95i
-Gyro: minivbar
-Pales principales: CF 255 Zeal (du kit)
-Pales AC: lynx plastic 47 et 50 mm (du kit)
@+
Modifié en dernier par Gloom le 27 mars 2015, 13:54, modifié 2 fois.
OXY rep/Lynx team pilot
-== Wittenheim(Haut-Rhin ) -==
Niveau : Voltige
Simu : RealFlight V7
Radio : DX7 & DX9
Hélicos
Nano CPX, Blade 180CFX, XK K110
Oxy 3 TE: 3 x MKS95, 1 x MKS DS95i, Neuron, ESC YGE 60 + EOX ????
Logo 500: 3 x S9452 , 1 x BLS251, Spirit PRO, ESC Jive100 + Scorpion HKIII-4020
Logo 600SE:3 x BLS451, 1 x BLS251, Spirit PRO, ESC Jive 80HV + Pyro 700-45
PROTOS 500: 3 x MKS 9660, 1 x MKS 760, Neuron, ESC YGE 60 + Z-POWER
Goblin 380: 3 x KST215, 1 x BK5005HV, Neuron, YGE 90 + Xnova 930Kv TE
- derailleur
- Armageddon
- Messages : 23396
- Enregistré le : 12 août 2008, 09:56
- Localisation : Marseille
Re: oxy 3 vos configurations
-Moteur/pignon: EOX 2214 - 4100 KV (du kit) pignon 11
-ESC: YEP 40A
-Lipo(s): 4S Mylipo.de 1600 mah
-Servos cyclique: KST 215
-Servo AC: MKS 93i
-Gyro: spirit
-Pales principales: CF 255 Zeal (du kit)
-Pales AC: lynx plastic 47 mm (du kit)
-ESC: YEP 40A
-Lipo(s): 4S Mylipo.de 1600 mah
-Servos cyclique: KST 215
-Servo AC: MKS 93i
-Gyro: spirit
-Pales principales: CF 255 Zeal (du kit)
-Pales AC: lynx plastic 47 mm (du kit)
Modifié en dernier par derailleur le 08 août 2015, 13:25, modifié 1 fois.
OXY rep/Lynx team pilot
XK K110
JR Forza 450 ex,spirit
GAUI X3 385L, spirit, CC edge 50
G500 SPOR, spirit, CC edge 120
OXY2 3S uspirit
OXY3 4S spirit
OXY 3 TE 4S spirit2
OXY 4 6S spirit
MINICOMET spirit
radio DX9
VTT Kona process 111 DL......
XK K110
JR Forza 450 ex,spirit
GAUI X3 385L, spirit, CC edge 50
G500 SPOR, spirit, CC edge 120
OXY2 3S uspirit
OXY3 4S spirit
OXY 3 TE 4S spirit2
OXY 4 6S spirit
MINICOMET spirit
radio DX9
VTT Kona process 111 DL......
- Stoparach
- Armageddon
- Messages : 19210
- Enregistré le : 13 déc. 2013, 20:04
- Localisation : Gignac-La-Nerthe
oxy 3 vos configurations
Moteur/pignon : scorpion 2213-14 3589kv pignon 12
Esc : yge 30
Lipos : 4s 1400 mah
Servos cyclique : 3x mks ds92a+
Servo ac : mks ds8910a+ (j'ai osé)
Gyro brain
Pales zeal et ac lynx plastic 47 mm
Poids à vide 518g
Avec lipo 656g
Esc : yge 30
Lipos : 4s 1400 mah
Servos cyclique : 3x mks ds92a+
Servo ac : mks ds8910a+ (j'ai osé)
Gyro brain
Pales zeal et ac lynx plastic 47 mm
Poids à vide 518g
Avec lipo 656g
Modifié en dernier par Stoparach le 19 févr. 2015, 11:48, modifié 1 fois.
- loki
- DETRAQUEUR
- Messages : 8842
- Enregistré le : 20 déc. 2012, 08:27
Re: oxy 3 vos configurations
devrait pas bouger ton AC avec ca lol
- Stoparach
- Armageddon
- Messages : 19210
- Enregistré le : 13 déc. 2013, 20:04
- Localisation : Gignac-La-Nerthe
oxy 3 vos configurations
J'ai du monter le support à l'envers pour un bon alignement vertical... Toute façon j'avais que ça en stock.
- irotaké
- Chancelier Suprême
- Messages : 728
- Enregistré le : 11 févr. 2014, 17:36
- Localisation : MONTLHERY
Re: oxy 3 vos configurations
Voila la mienne:
-Moteur/pignon: Motor EOX 2214 V2 - 4100KV Back Edition >pignon 11
-ESC:ESC 40A Hobbywing OEM OXY3
-Lipo(s): Lynx EOX1400 mAh 4s 35C
-Servos cyclique: TGY 306 HV
-Servo AC: MKS 93iHV
-Gyro: microbeast V4+ et sat spektrum
-Pales principales: CF 255 Zeal (du kit)
-Pales AC: lynx plastic 47 mm(du kit)
Sbec: Finalement BEC interne pour le moment
-Moteur/pignon: Motor EOX 2214 V2 - 4100KV Back Edition >pignon 11
-ESC:ESC 40A Hobbywing OEM OXY3
-Lipo(s): Lynx EOX1400 mAh 4s 35C
-Servos cyclique: TGY 306 HV
-Servo AC: MKS 93iHV
-Gyro: microbeast V4+ et sat spektrum
-Pales principales: CF 255 Zeal (du kit)
-Pales AC: lynx plastic 47 mm(du kit)
Sbec: Finalement BEC interne pour le moment
Modifié en dernier par irotaké le 20 févr. 2015, 15:50, modifié 1 fois.
TAUPE PILOTE # 6
VBAR CONTROL
G500/NEO/HW120A/QF
T REX 700X/NEO/HW130A/DS820/825M
POLARON EX1400
Ultramat 16S
Lynx Team Pilot
VBAR CONTROL
G500/NEO/HW120A/QF
T REX 700X/NEO/HW130A/DS820/825M
POLARON EX1400
Ultramat 16S
Lynx Team Pilot
Re: oxy 3 vos configurations
-Moteur/pignon:stock /11 dents
-ESC:hobbywing 40 amp
-Lipo(s):1300 4 s 25 c
-Servos cyclique:kst 215
-Servo AC:kst 215
-Gyro:mîni vbar
-ESC:hobbywing 40 amp
-Lipo(s):1300 4 s 25 c
-Servos cyclique:kst 215
-Servo AC:kst 215
-Gyro:mîni vbar
- Stoparach
- Armageddon
- Messages : 19210
- Enregistré le : 13 déc. 2013, 20:04
- Localisation : Gignac-La-Nerthe
Re: oxy 3 vos configurations
Scorpîon ,mks de 5 kg a l ac et en plus 1 seule tringle de servo ! T vraiment trop un rebel toi !
- Stoparach
- Armageddon
- Messages : 19210
- Enregistré le : 13 déc. 2013, 20:04
- Localisation : Gignac-La-Nerthe
- Rich Knapp
- Général
- Messages : 320
- Enregistré le : 26 mars 2015, 18:07
- Localisation : Wisconsin USA
- Contact :
Re: oxy 3 vos configurations
SE OXY 3:
EOX 4100-V2
ServoKings (995i tail, 995 cyclic)
HW ESC
iKon FBL
EOX 3S 1400mAh's
DSMX sat
OXY #2:
EOX 4100-V2
ServoKing tail 995i
KST 215's cyclics
DSMX sat
CC 10A BEC
EDIT: Brain = planed bD 3SX FBL (reason for BEC), will take to much work to frame and unit case to get it to fit in frame.
HW ESC
EOX 3S 1400mAh's
EOX 4100-V2
ServoKings (995i tail, 995 cyclic)
HW ESC
iKon FBL
EOX 3S 1400mAh's
DSMX sat
OXY #2:
EOX 4100-V2
ServoKing tail 995i
KST 215's cyclics
DSMX sat
CC 10A BEC
EDIT: Brain = planed bD 3SX FBL (reason for BEC), will take to much work to frame and unit case to get it to fit in frame.
HW ESC
EOX 3S 1400mAh's
Modifié en dernier par Rich Knapp le 29 mars 2015, 18:33, modifié 1 fois.
Team Lynx & OXY HELI Manager
- Stoparach
- Armageddon
- Messages : 19210
- Enregistré le : 13 déc. 2013, 20:04
- Localisation : Gignac-La-Nerthe
- Rich Knapp
- Général
- Messages : 320
- Enregistré le : 26 mars 2015, 18:07
- Localisation : Wisconsin USA
- Contact :
Re: oxy 3 vos configurations
Thank you.Stoparach a écrit :Yeeaaaah Rich is here!!!! Welcome!!
I just need to figure this out.
Now I know how you all felt on the English sites. lol
Team Lynx & OXY HELI Manager
- loki
- DETRAQUEUR
- Messages : 8842
- Enregistré le : 20 déc. 2012, 08:27
Re: oxy 3 vos configurations
Hey welcome rich. We LL try to translate for whose who do not speak english.
- pachy
- Armageddon
- Messages : 38364
- Enregistré le : 08 nov. 2012, 10:22
- Localisation : Velaux
Re: oxy 3 vos configurations
Yeeeaaaahhhhh coooool !!!!!! Welcome RichRich Knapp a écrit :Thank you.Stoparach a écrit :Yeeaaaah Rich is here!!!! Welcome!!
I just need to figure this out.
Now I know how you all felt on the English sites. lol
You can introduce you , somebody will translate
viewforum.php?f=42
The Meeting Heli4 2013/2014/2015/2016/2017/2019..., j'y étais!!!
- Rich Knapp
- Général
- Messages : 320
- Enregistré le : 26 mars 2015, 18:07
- Localisation : Wisconsin USA
- Contact :
Re: oxy 3 vos configurations
Made a post there but I must be to new for it to show up right away.pachy a écrit :Yeeeaaaahhhhh coooool !!!!!! Welcome RichRich Knapp a écrit :Thank you.Stoparach a écrit :Yeeaaaah Rich is here!!!! Welcome!!
I just need to figure this out.
Now I know how you all felt on the English sites. lol
You can introduce you , somebody will translate
viewforum.php?f=42
Team Lynx & OXY HELI Manager
- jconcept
- Chevalier Jedi
- Messages : 1188
- Enregistré le : 30 sept. 2013, 16:42
Re: oxy 3 vos configurations
Mon petit OXY3:
-Moteur/pignon:stock /11 dents
-ESC:hobbywing 40 amp
-Lipo(s):1300 4 s 25 c
-Servos cyclique: TY306 hv
-Servo AC:kst 215
-Gyro:Turnigy hd v2
-Pales: Zeal 255 kit ou Lynx 245 fluo
-Moteur/pignon:stock /11 dents
-ESC:hobbywing 40 amp
-Lipo(s):1300 4 s 25 c
-Servos cyclique: TY306 hv
-Servo AC:kst 215
-Gyro:Turnigy hd v2
-Pales: Zeal 255 kit ou Lynx 245 fluo
Modifié en dernier par jconcept le 27 mars 2015, 15:08, modifié 1 fois.
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: oxy 3 vos configurations
Mon Oxy3:
Moteur: EOX 4100-V2 (4100kv)
Servo: ServoKings (995i AC, 995 cyclique)
Esc: YEP45A
Module: Beastx plus
Lipo: Turnigy Nanotech 4s 25-50C 1300mah
Satellite:DSM2
Bec: Gryphon Polaris GSR-3030
Tps de vol: 4 minutes
Moteur: EOX 4100-V2 (4100kv)
Servo: ServoKings (995i AC, 995 cyclique)
Esc: YEP45A
Module: Beastx plus
Lipo: Turnigy Nanotech 4s 25-50C 1300mah
Satellite:DSM2
Bec: Gryphon Polaris GSR-3030
Tps de vol: 4 minutes
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
- Sklad
- Chevalier Jedi
- Messages : 1168
- Enregistré le : 27 avr. 2014, 11:04
- Localisation : Sud !
Re: oxy 3 vos configurations
Voilà pour mon Oxy 3, je crois que je commence à l'apprécier
Moteur : EOX 2214 - 4100 KV (du kit), pignon 11.
Esc : OXY 3 ESC 40A HOBBYWING.
Servos cyclique : KST DS215MG HV.
Servo AC : MKS 93i HV.
Module : Spirit System avec 2 satellites DSMX 22ms.
Lipo : Zippy compact 1300mAh 40C.
Temps de vol : 4 minutes.
Pulvérisé sur problème du module Spirit...
Moteur : EOX 2214 - 4100 KV (du kit), pignon 11.
Esc : OXY 3 ESC 40A HOBBYWING.
Servos cyclique : KST DS215MG HV.
Servo AC : MKS 93i HV.
Module : Spirit System avec 2 satellites DSMX 22ms.
Lipo : Zippy compact 1300mAh 40C.
Temps de vol : 4 minutes.
Pulvérisé sur problème du module Spirit...
Modifié en dernier par Sklad le 24 mai 2015, 11:05, modifié 1 fois.
- Rich Knapp
- Général
- Messages : 320
- Enregistré le : 26 mars 2015, 18:07
- Localisation : Wisconsin USA
- Contact :
Re: oxy 3 vos configurations
Converted the SE OXY 3 to my daily flier.
EOX 4100-V2- going to EOX 2214 -2500kv
ServoKings (995i tail, 995 cyclic)
HW 40A ESC
iKon FBL
EOX 3S 1400mAh's - going to EOX 6S 900mAh
DSMX sat
Taking the 4100-V2 out and doing a 6S conversion to it this week.
Getting it ready for the stretch kit.
EOX 4100-V2- going to EOX 2214 -2500kv
ServoKings (995i tail, 995 cyclic)
HW 40A ESC
iKon FBL
EOX 3S 1400mAh's - going to EOX 6S 900mAh
DSMX sat
Taking the 4100-V2 out and doing a 6S conversion to it this week.
Getting it ready for the stretch kit.
Team Lynx & OXY HELI Manager
- Rich Knapp
- Général
- Messages : 320
- Enregistré le : 26 mars 2015, 18:07
- Localisation : Wisconsin USA
- Contact :
- Sklad
- Chevalier Jedi
- Messages : 1168
- Enregistré le : 27 avr. 2014, 11:04
- Localisation : Sud !
Re: oxy 3 vos configurations
Voici la configuration de mon second Oxy, après la pulvérisation du premier sur soucis du module...
Moteur : EOX 2214 - 4100 KV (du kit), pignon 11.
Esc : OXY 3 ESC 40A HOBBYWING.
Servos cyclique : KST DS215MG HV.
Servo AC : MKS 93i HV.
Module : MicroBeast Plus V3.2 avec 1 satellite DSMX 22ms.
Lipo : Zippy compact 1300mAh 40C.
Temps de vol : 4 minutes.
Moteur : EOX 2214 - 4100 KV (du kit), pignon 11.
Esc : OXY 3 ESC 40A HOBBYWING.
Servos cyclique : KST DS215MG HV.
Servo AC : MKS 93i HV.
Module : MicroBeast Plus V3.2 avec 1 satellite DSMX 22ms.
Lipo : Zippy compact 1300mAh 40C.
Temps de vol : 4 minutes.
- Le Docteur
- Armageddon
- Messages : 20338
- Enregistré le : 06 mars 2011, 18:45
- Contact :
Re: oxy 3 vos configurations
Hello ! Ma future configuration ! Vous en pensez quoi ?
My future setup, what do you think about ?
Moteur : EOX 2214 - 4100 KV (du kit), pignon 11.
Esc : YEP 40A
Servos cyclique : KST DS215MG HV
Servo AC : KST DS215MG HV
Module : MicroBeast Plus avec sat DSMX
Lipo : Turnigy Nanotech 4s 25-50C 1300mah
My future setup, what do you think about ?
Moteur : EOX 2214 - 4100 KV (du kit), pignon 11.
Esc : YEP 40A
Servos cyclique : KST DS215MG HV
Servo AC : KST DS215MG HV
Module : MicroBeast Plus avec sat DSMX
Lipo : Turnigy Nanotech 4s 25-50C 1300mah
Modifié en dernier par Le Docteur le 25 mai 2015, 20:43, modifié 1 fois.
Bien Amicalement,
- lolo63
- DARK VADOR
- Messages : 6342
- Enregistré le : 13 mars 2013, 22:34
- Localisation : CLERMONT-FERRAND
Re: oxy 3 vos configurations
Ben j'ai quasi la même , il a un bec HV le yep? Ça devrait lui aller au poil
padawan de steph66
Clermont-Ferrand (63) 32 ans
DX1Ot monomanche
Ultramat 16, powerpeak twin,Icharger 4010 Duo avec alim maison .
Next
:
Nano CPX;Trex150
OXY3;Goblin 380 => eznov neuron
Goblin 700 => neuron
Oxy3 qube =>beastX
OXY rep/Lynx team pilot
Clermont-Ferrand (63) 32 ans
DX1Ot monomanche
Ultramat 16, powerpeak twin,Icharger 4010 Duo avec alim maison .
Next
:
Nano CPX;Trex150
OXY3;Goblin 380 => eznov neuron
Goblin 700 => neuron
Oxy3 qube =>beastX
OXY rep/Lynx team pilot
- Le Docteur
- Armageddon
- Messages : 20338
- Enregistré le : 06 mars 2011, 18:45
- Contact :
- Nicolas3881
- Modo
- Messages : 54296
- Enregistré le : 11 oct. 2012, 13:30
Re: oxy 3 vos configurations
Mais t'as déjà eu un Oxy Doc????
Membre du Rotor Club Alpin !
OXY rep/Lynx team pilot
--------------------The Meeting Heli4 2014, 2015, 2016 et 2017..., j'y étais!!!--------------------
--------------------The Meeting Heli4 2018..., j'y serai !!!--------------------
OXY rep/Lynx team pilot
--------------------The Meeting Heli4 2014, 2015, 2016 et 2017..., j'y étais!!!--------------------
--------------------The Meeting Heli4 2018..., j'y serai !!!--------------------
- Le Docteur
- Armageddon
- Messages : 20338
- Enregistré le : 06 mars 2011, 18:45
- Contact :
Re: oxy 3 vos configurations
Non c'est mon premier Nico, pourquoi ?
Tu suis plus Nico !
Doc il revend son 180, et il va acheter un Oxy
Tu suis plus Nico !
Doc il revend son 180, et il va acheter un Oxy
Bien Amicalement,
- Nicolas3881
- Modo
- Messages : 54296
- Enregistré le : 11 oct. 2012, 13:30
Re: oxy 3 vos configurations
Ben relis toi..
C'est pas bien le copié collé.
C'est pas bien le copié collé.
Le Docteur a écrit :Hello ! Ma future configuration ! Vous en pensez quoi ?
My future setup, what do you think about ?
Voici la configuration de mon second Oxy, après la pulvérisation du premier sur soucis du module...
Moteur : EOX 2214 - 4100 KV (du kit), pignon 11.
Esc : YEP 40A
Servos cyclique : KST DS215MG HV
Servo AC : KST DS215MG HV
Module : MicroBeast Plus avec sat DSMX
Lipo : Turnigy Nanotech 4s 25-50C 1300mah
Membre du Rotor Club Alpin !
OXY rep/Lynx team pilot
--------------------The Meeting Heli4 2014, 2015, 2016 et 2017..., j'y étais!!!--------------------
--------------------The Meeting Heli4 2018..., j'y serai !!!--------------------
OXY rep/Lynx team pilot
--------------------The Meeting Heli4 2014, 2015, 2016 et 2017..., j'y étais!!!--------------------
--------------------The Meeting Heli4 2018..., j'y serai !!!--------------------
- Le Docteur
- Armageddon
- Messages : 20338
- Enregistré le : 06 mars 2011, 18:45
- Contact :
Re: oxy 3 vos configurations
Hein de quoi tu parles ?
J ai juste récupérer le canevas
J ai juste récupérer le canevas
Bien Amicalement,
- irotaké
- Chancelier Suprême
- Messages : 728
- Enregistré le : 11 févr. 2014, 17:36
- Localisation : MONTLHERY
Re: oxy 3 vos configurations
salut les pilotes,
Quelqu'un pourrais me donner l'autonomie des nanotech 1300 4S 25/50C.
Je suis aux alentours de 3.30 avec les lynx 1400 35C, a 75%,et en gove, c'est peu non ?
Richard.
Quelqu'un pourrais me donner l'autonomie des nanotech 1300 4S 25/50C.
Je suis aux alentours de 3.30 avec les lynx 1400 35C, a 75%,et en gove, c'est peu non ?
Richard.
TAUPE PILOTE # 6
VBAR CONTROL
G500/NEO/HW120A/QF
T REX 700X/NEO/HW130A/DS820/825M
POLARON EX1400
Ultramat 16S
Lynx Team Pilot
VBAR CONTROL
G500/NEO/HW120A/QF
T REX 700X/NEO/HW130A/DS820/825M
POLARON EX1400
Ultramat 16S
Lynx Team Pilot
- Stoparach
- Armageddon
- Messages : 19210
- Enregistré le : 13 déc. 2013, 20:04
- Localisation : Gignac-La-Nerthe
oxy 3 vos configurations
C'est ce que j'ai à 4200 rpm sur le mien en 1400 35c eox.
En gov ce qui compte c'est la valeur des rpm moins des gazs... Même si c'est dépendant un gov à 75% peux donner des rpm différents sur chaque machine.
À 3:30 il me reste environ 3,75v par cellule.
En gov ce qui compte c'est la valeur des rpm moins des gazs... Même si c'est dépendant un gov à 75% peux donner des rpm différents sur chaque machine.
À 3:30 il me reste environ 3,75v par cellule.
- irotaké
- Chancelier Suprême
- Messages : 728
- Enregistré le : 11 févr. 2014, 17:36
- Localisation : MONTLHERY
Re: oxy 3 vos configurations
Merci Sto,
Faut que je prennes les rpm,j'ai l'impression qu il tourne vite effectivement.
Je viens de commander les mylipo 1600,ca devrait etre un peu plus confortable.
Je ferais un retour des que je les ai.
Faut que je prennes les rpm,j'ai l'impression qu il tourne vite effectivement.
Je viens de commander les mylipo 1600,ca devrait etre un peu plus confortable.
Je ferais un retour des que je les ai.
TAUPE PILOTE # 6
VBAR CONTROL
G500/NEO/HW120A/QF
T REX 700X/NEO/HW130A/DS820/825M
POLARON EX1400
Ultramat 16S
Lynx Team Pilot
VBAR CONTROL
G500/NEO/HW120A/QF
T REX 700X/NEO/HW130A/DS820/825M
POLARON EX1400
Ultramat 16S
Lynx Team Pilot
- Rich Knapp
- Général
- Messages : 320
- Enregistré le : 26 mars 2015, 18:07
- Localisation : Wisconsin USA
- Contact :
Re: oxy 3 vos configurations
Team Lynx & OXY HELI Manager
- lolo63
- DARK VADOR
- Messages : 6342
- Enregistré le : 13 mars 2013, 22:34
- Localisation : CLERMONT-FERRAND
Re: oxy 3 vos configurations
wooooooooooooooooowwwwwwwwwwwww . it's a monster!!!
padawan de steph66
Clermont-Ferrand (63) 32 ans
DX1Ot monomanche
Ultramat 16, powerpeak twin,Icharger 4010 Duo avec alim maison .
Next
:
Nano CPX;Trex150
OXY3;Goblin 380 => eznov neuron
Goblin 700 => neuron
Oxy3 qube =>beastX
OXY rep/Lynx team pilot
Clermont-Ferrand (63) 32 ans
DX1Ot monomanche
Ultramat 16, powerpeak twin,Icharger 4010 Duo avec alim maison .
Next
:
Nano CPX;Trex150
OXY3;Goblin 380 => eznov neuron
Goblin 700 => neuron
Oxy3 qube =>beastX
OXY rep/Lynx team pilot
- Rich Knapp
- Général
- Messages : 320
- Enregistré le : 26 mars 2015, 18:07
- Localisation : Wisconsin USA
- Contact :
Re: oxy 3 vos configurations
Thank you much. It is a very exiting to fly it.lolo63 a écrit :wooooooooooooooooowwwwwwwwwwwww . it's a monster!!!
Team Lynx & OXY HELI Manager
- cabriole
- Chevalier Jedi
- Messages : 2804
- Enregistré le : 01 août 2008, 23:07
- Localisation : beaujolais
Re: oxy 3 vos configurations
Hello à tous voici pour ma config
- Kit: avec moteur et esc acheté à domicile chez FuturHéli
-Moteur/pignon: EOX 2214 - 4100 KV (du kit), pignon 10 ou 11 dents à confirmer
-ESC: Yep 40A
-Lipo(s): Swixcore 4S 1300mA 40C
-Servos cyclique: MKS DS93
-Servo AC: TGY 306
-Gyro: Ar 7200 BX
-Pales principales: Lynx 245mm
-Pales AC: Lynx 47mm
je n'ai pas encore volé en version 4S, si tout va bien , ce sera pour ce we; sinon en 3S et pignon 14 dents, c'est déjà terrible; superbe machine
- Kit: avec moteur et esc acheté à domicile chez FuturHéli
-Moteur/pignon: EOX 2214 - 4100 KV (du kit), pignon 10 ou 11 dents à confirmer
-ESC: Yep 40A
-Lipo(s): Swixcore 4S 1300mA 40C
-Servos cyclique: MKS DS93
-Servo AC: TGY 306
-Gyro: Ar 7200 BX
-Pales principales: Lynx 245mm
-Pales AC: Lynx 47mm
je n'ai pas encore volé en version 4S, si tout va bien , ce sera pour ce we; sinon en 3S et pignon 14 dents, c'est déjà terrible; superbe machine
OXY 3 / Beastx / DE LA BALLE
Prometheus P2 Eflite
Super scorpion 70mm FMS
Prometheus P2 Eflite
Super scorpion 70mm FMS
- kevin94
- Chancelier Suprême
- Messages : 678
- Enregistré le : 02 août 2015, 11:49
- Localisation : 26
Re: oxy 3 vos configurations
Salut j insère ma demande ici car elle concerne aussi la configuration dans un sens plus large. Soit :
Comme les moteurs scorpion le moteur Lynx pour l oxy3 dans la notice est mis pour un timing de 5°. On a pour habitude de voir plutôt du 18° pour nos moteurs.
Quel timing mettre du coup et pourquoi ce 5° ?
Par avance mille mercis
Comme les moteurs scorpion le moteur Lynx pour l oxy3 dans la notice est mis pour un timing de 5°. On a pour habitude de voir plutôt du 18° pour nos moteurs.
Quel timing mettre du coup et pourquoi ce 5° ?
Par avance mille mercis
Goblin 700 RAW & Fireball
La passion est un moteur dont on ne mesure pas la puissance
La passion est un moteur dont on ne mesure pas la puissance
Qui est en ligne
Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 1 invité