Phoenix RC "V2.5 + MAJ" disponible
-
- Michel Galabru
- Messages : 10859
- Enregistré le : 10 janv. 2008, 20:37
- Localisation : Gaillac 81
Ah ouais, ils ont même pas pensé à nous remercier...
Special Thanks
We would like to say a special thank you to the following people for helping bring this update to release:
Curtis Youngblood
Duncan Osborne
Mike Williams
Ashley Davis
Rob Turnbull
Trev Burley
Pete Ikusz
All members of the Phoenix 2.5 BETA team
[img]http://www.delaplacem.fr/images/fourmi.gif[/img]
-
- Général
- Messages : 440
- Enregistré le : 16 avr. 2007, 22:47
- Localisation : Montigny le Bretonneux
-
- Maître Jedi
- Messages : 4646
- Enregistré le : 02 juil. 2007, 09:49
- Localisation : France : Massy ( 91 ) / Châlette sur Loing ( 45 )
- Contact :
On n'est plus en béta ??? Z'êtes sûr ...
Ah, fallait bien enfin donner une ombre à la manche à air depuis le temps ...
( Windsock now casts a shadow )
Si ça se trouve elle devient aussi "dure" et pas "transparente" ...
Et c'est quoi ce "pop" du cyclique sur grosses ressources à grande vitesse ?
( Added helicopter cyclic "pop" on hard inputs under speed ).
Ah, fallait bien enfin donner une ombre à la manche à air depuis le temps ...
( Windsock now casts a shadow )
Si ça se trouve elle devient aussi "dure" et pas "transparente" ...
Et c'est quoi ce "pop" du cyclique sur grosses ressources à grande vitesse ?
( Added helicopter cyclic "pop" on hard inputs under speed ).
-
- Maître Jedi
- Messages : 4646
- Enregistré le : 02 juil. 2007, 09:49
- Localisation : France : Massy ( 91 ) / Châlette sur Loing ( 45 )
- Contact :
Je viens de comprendre ce qu'est le "pop" de cyclique grâce à helifreak ...
et j'ai testé sous PhoenixRC la "chose".
Faites une translation rapide plein badin ... très rapide ...
Faites un tonneau, mais très "sec" au cyclique, manche dans le coin ...
Au début vous verrez un "pop" du cyclique, c'est très vif d'un coup et revient à la normale juste après,
on le ressent très bien.
La première fois ça surprend
C'est censé claquer aussi, mais c'est difficle à distinguer.
et j'ai testé sous PhoenixRC la "chose".
Faites une translation rapide plein badin ... très rapide ...
Faites un tonneau, mais très "sec" au cyclique, manche dans le coin ...
Au début vous verrez un "pop" du cyclique, c'est très vif d'un coup et revient à la normale juste après,
on le ressent très bien.
La première fois ça surprend
C'est censé claquer aussi, mais c'est difficle à distinguer.
- Jonathan06
- DARK VADOR
- Messages : 6034
- Enregistré le : 26 août 2007, 23:23
- Localisation : Nice
- Contact :
Je comprend toujour pas ce que c'estDanRZ @ 17 Jul 2009, à 23:16 a écrit : Au début vous verrez un "pop" du cyclique
Et on le voie comment?
France PhoenixRC PCM9XII Trex250 Beast + Trex450Pro Beast + Trex500ESP BeastX + Trex600ESP BeastX + BeamAvantgarde600 Beast + Trex700E V2 en cours de montage
RV4+DLE30, Katana, MiniSwift, Yak54 EPP, Foxy, Cherokee, EasyStar ...
Videos: Page Perso
RV4+DLE30, Katana, MiniSwift, Yak54 EPP, Foxy, Cherokee, EasyStar ...
Videos: Page Perso
-
- Maître Jedi
- Messages : 4646
- Enregistré le : 02 juil. 2007, 09:49
- Localisation : France : Massy ( 91 ) / Châlette sur Loing ( 45 )
- Contact :
En fait le cyclique est ultra vif en début de tonneau ... ça part violemment d'un coup sur presque un quart de tour pour moi, et ensuite je retrouve un cyclique latéral normal.
Et en fait je réalise que certains pilotes utilisent ça pour faire des changements de direction rapides et brusques ... j'en ai déjà vu et je n'arrivais pas à comprendre ...
Je comprends mieux désormais.
Il y a un petit instant ou le cyclique est plus "sec" ... du fait de la vitesse ...
Et en fait je réalise que certains pilotes utilisent ça pour faire des changements de direction rapides et brusques ... j'en ai déjà vu et je n'arrivais pas à comprendre ...
Je comprends mieux désormais.
Il y a un petit instant ou le cyclique est plus "sec" ... du fait de la vitesse ...
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Ca y est la version "n" est disponible au téléchargement ... à vos simus messieurs!!
Rien de tel que phoenix et ses MAJ gratuites .... que du bonheur!!
A+.
Ben.
Ca y est la version "n" est disponible au téléchargement ... à vos simus messieurs!!
Rien de tel que phoenix et ses MAJ gratuites .... que du bonheur!!
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
-
- Michel Galabru
- Messages : 10859
- Enregistré le : 10 janv. 2008, 20:37
- Localisation : Gaillac 81
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,
Moi en ce moment pas trop de possibilités de voler (garder les momes) ... donc de temps en temps simu, c'est pour cela que je l'ai vu ....
Et pour une fois que je suis le prem's à voir une MAJ .... hé hé!!
A+.
Ben.
Moi en ce moment pas trop de possibilités de voler (garder les momes) ... donc de temps en temps simu, c'est pour cela que je l'ai vu ....
Et pour une fois que je suis le prem's à voir une MAJ .... hé hé!!
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- coom
- Chancelier Suprême
- Messages : 752
- Enregistré le : 23 mai 2009, 01:50
- Localisation : Gennevilliers (Idf, 92)
- Contact :
-
- Michel Galabru
- Messages : 10859
- Enregistré le : 10 janv. 2008, 20:37
- Localisation : Gaillac 81
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,Boomslang @ 18 Aug 2009, à 22:10 a écrit :Ça encore passe, mais le premier à le téléch...ger ça "c'est de la balle de preum's de lagambas" !! ha ha ha !!!lagambas @ 18 Aug 2009, à 18:22 a écrit : Et pour une fois que je suis le prem's à voir une MAJ .... hé hé!!
Ca va, à ce niveau là je prends des risques!!
MDR!!!
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- Burns_Brother
- allezzzzzzzzzzzz
- Messages : 11888
- Enregistré le : 04 juin 2008, 12:30
-
- Maître Jedi
- Messages : 4646
- Enregistré le : 02 juil. 2007, 09:49
- Localisation : France : Massy ( 91 ) / Châlette sur Loing ( 45 )
- Contact :
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,DanRZ @ 18 Aug 2009, à 23:50 a écrit : Au passage faudrait poster ailleurs, ça n'est plus la béta hein
Oui d'accord mais c'est les MAJ.
Il faudrait surtout modifier le titre, ca serait plus simple et comme ca on garde la chronologie.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- Jonathan06
- DARK VADOR
- Messages : 6034
- Enregistré le : 26 août 2007, 23:23
- Localisation : Nice
- Contact :
Voila titre modifié
France PhoenixRC PCM9XII Trex250 Beast + Trex450Pro Beast + Trex500ESP BeastX + Trex600ESP BeastX + BeamAvantgarde600 Beast + Trex700E V2 en cours de montage
RV4+DLE30, Katana, MiniSwift, Yak54 EPP, Foxy, Cherokee, EasyStar ...
Videos: Page Perso
RV4+DLE30, Katana, MiniSwift, Yak54 EPP, Foxy, Cherokee, EasyStar ...
Videos: Page Perso
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,Jonathan06 @ 19 Aug 2009, à 09:49 a écrit : Voila titre modifié
Super, impec, là ca tout bon et on s'y retrouve.
Merci Jonathan.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,Boomslang @ 19 Aug 2009, à 09:37 a écrit : Ouais c'est vrai lagambas, ne te laisses pas faire tu as raison !
Oui c'est surtout une question de logique.
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
-
- Maître Jedi
- Messages : 4646
- Enregistré le : 02 juil. 2007, 09:49
- Localisation : France : Massy ( 91 ) / Châlette sur Loing ( 45 )
- Contact :
- lagambas
- Chevalier Jedi
- Messages : 1369
- Enregistré le : 22 mai 2008, 23:38
- Localisation : Lozère
- Contact :
Salut,DanRZ @ 19 Aug 2009, à 12:02 a écrit :C'est fait, nan mais oh, il est à moi ce postBoomslang @ 19 Aug 2009, à 09:01 a écrit : Ouais ben dans ce cas là, il faudrait rajouter quelques lettres en dessous du titre Jonathan hein !?
Tu es sur?? Nous en avons pris possession .... MDR!!!
A+.
Ben.
[img]http://forum.heli4.com/icones/drapo_fr.png[/img] [b]Lozère - 48 -[/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Trex 600 CF [/b]- 1 LIPO 6S1P G3 VX hypérion 5500 mah + 3 LIPOS Align 6S2P 25C 5200 mah - Gyro Align GP750.
[img]http://forum.heli4.com/icones/cp.png[/img] [b]MSH PRÔTOS 500. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]KDS 450 SV. [/b]
[img]http://forum.heli4.com/icones/cp.png[/img] [b]Belt CP carbone édition [/b]- 3 Servos tower pro sg90 - Bat. 1800 et 2 x 2100 mAh.
[img]http://forum.heli4.com/icones/plane.png[/img] [b]Easystar - EasygGlider PRO. [/b]
[img]http://forum.heli4.com/icones/radio.png[/img] [b]RC Futaba T10C 41 Mhz + module 2.4 Ghz.[/b]
[img]http://forum.heli4.com/icones/simu.png[/img] [b]Simulateur de vol PhoenixRC. [/b]
[img]http://forum.heli4.com/icones/charger.png[/img][b]Chargeur Hypérion EOS 720inet[/b] + cable firmware + adaptateur ALIGN.
Powered by aerovisuel.com - KDS - MSH - GAUI - HYPERION - EDGE
[img]http://www.aerovisuel.com/images/avatar/helicoavatar06.jpg[/img]
- Jonathan06
- DARK VADOR
- Messages : 6034
- Enregistré le : 26 août 2007, 23:23
- Localisation : Nice
- Contact :
DésoléDanRZ @ 19 Aug 2009, à 12:02 a écrit :C'est fait, nan mais oh, il est à moi ce postBoomslang @ 19 Aug 2009, à 09:01 a écrit : Ouais ben dans ce cas là, il faudrait rajouter quelques lettres en dessous du titre Jonathan hein !?
France PhoenixRC PCM9XII Trex250 Beast + Trex450Pro Beast + Trex500ESP BeastX + Trex600ESP BeastX + BeamAvantgarde600 Beast + Trex700E V2 en cours de montage
RV4+DLE30, Katana, MiniSwift, Yak54 EPP, Foxy, Cherokee, EasyStar ...
Videos: Page Perso
RV4+DLE30, Katana, MiniSwift, Yak54 EPP, Foxy, Cherokee, EasyStar ...
Videos: Page Perso
-
- Maître Jedi
- Messages : 4646
- Enregistré le : 02 juil. 2007, 09:49
- Localisation : France : Massy ( 91 ) / Châlette sur Loing ( 45 )
- Contact :
- Woody
- Caporal
- Messages : 38
- Enregistré le : 27 juil. 2009, 12:39
Nouveau patch 2.5p dispo ce jour
[img]http://goodies.heli4.com/icones/drapo_fr.png[/img] Xavier, 37 ans
[img]http://goodies.heli4.com/icones/bi.png[/img] Lama V4
[img]http://goodies.heli4.com/icones/fp.png[/img] Walkera 4#3B 2.5Ghz
[img]http://goodies.heli4.com/icones/cp.png[/img] Belt CP V2
[img]http://goodies.heli4.com/icones/radio.png[/img] DX7 mode 1
[img]http://goodies.heli4.com/icones/simu.png[/img] Phoenix RC 2.5
[img]http://goodies.heli4.com/icones/bi.png[/img] Lama V4
[img]http://goodies.heli4.com/icones/fp.png[/img] Walkera 4#3B 2.5Ghz
[img]http://goodies.heli4.com/icones/cp.png[/img] Belt CP V2
[img]http://goodies.heli4.com/icones/radio.png[/img] DX7 mode 1
[img]http://goodies.heli4.com/icones/simu.png[/img] Phoenix RC 2.5
- Oli
- Armageddon
- Messages : 47080
- Enregistré le : 24 janv. 2008, 23:56
- Localisation : Lyon
-
- Général
- Messages : 440
- Enregistré le : 16 avr. 2007, 22:47
- Localisation : Montigny le Bretonneux
-
- Caporal
- Messages : 48
- Enregistré le : 25 sept. 2009, 17:32
Bonjour, je suis nouveau ici, je me suis inscrit hier.
Je possède phoenix et je narrive pas à installer la version 2.5.
Je la télécharge à partir site : http://www.phoenix-sim.com/downloads.htm" onclick="window.open(this.href);return false; et à linstallation il me dit : Error reading setup initialization file.
Avez-vous eu le même problème ?
Que dois-je faire ?
(On ne sait jamais, des fois quil ne soit pas en place) Où dois-je linstaller ?
Jai essayer sur c : mes documents et sur c : dans program files, et jai le même résultat.
Pour info, jai la version 2.00.N
Voila, merci bien pour votre aide précieuse.
Bons vols a tous.
Amicalement, Rv
Je possède phoenix et je narrive pas à installer la version 2.5.
Je la télécharge à partir site : http://www.phoenix-sim.com/downloads.htm" onclick="window.open(this.href);return false; et à linstallation il me dit : Error reading setup initialization file.
Avez-vous eu le même problème ?
Que dois-je faire ?
(On ne sait jamais, des fois quil ne soit pas en place) Où dois-je linstaller ?
Jai essayer sur c : mes documents et sur c : dans program files, et jai le même résultat.
Pour info, jai la version 2.00.N
Voila, merci bien pour votre aide précieuse.
Bons vols a tous.
Amicalement, Rv
- Burns_Brother
- allezzzzzzzzzzzz
- Messages : 11888
- Enregistré le : 04 juin 2008, 12:30
-
- Caporal
- Messages : 48
- Enregistré le : 25 sept. 2009, 17:32
SalutBurns_Brother @ 28 Sep 2009, à 17:08 a écrit : salut rv, as tu installé au préalable le cd rom, et cela fonctionne t-il ? (version 2.0)
Oui oui, ma version est authentique, c'est une version achetée sur leboncoin avec les cordons.
Mais ce qu'il me paraît bizarre aussi, c'est que je ne me suis pas inscrit nulle part, aucune identification de loriginalité du programme.
Rv
- Burns_Brother
- allezzzzzzzzzzzz
- Messages : 11888
- Enregistré le : 04 juin 2008, 12:30
- Burns_Brother
- allezzzzzzzzzzzz
- Messages : 11888
- Enregistré le : 04 juin 2008, 12:30
- Burns_Brother
- allezzzzzzzzzzzz
- Messages : 11888
- Enregistré le : 04 juin 2008, 12:30
oui, car c'est ton câble qui donne l'autentification (si je dis pas de bêtises)
le mieux, tu retournes sur le site de phoenix, ton cable simu branché, et tu télécharges la version 2.5 r (la dernière), mais ça va prendre surement une heure pour téléch...ger ça, ensuite les dernières MAJ arriveront toutes seules
tiens nous au jus
olivier
le mieux, tu retournes sur le site de phoenix, ton cable simu branché, et tu télécharges la version 2.5 r (la dernière), mais ça va prendre surement une heure pour téléch...ger ça, ensuite les dernières MAJ arriveront toutes seules
tiens nous au jus
olivier
-
- Caporal
- Messages : 48
- Enregistré le : 25 sept. 2009, 17:32
- Burns_Brother
- allezzzzzzzzzzzz
- Messages : 11888
- Enregistré le : 04 juin 2008, 12:30
Qui est en ligne
Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 1 invité