Page 1 sur 1

Projet en cours: multirotor

Posté : 10 juin 2013, 22:35
par fred57440
Bonsoir,

J'ai en projet de réaliser un multirotor.

Pour eviter de frais de douanes trop important , j'ai séparé ma commande en 3.

Voici ce que j'ai deja commandé:

J'ai commandé cette ecran en 1 seul colis:

http://www.hobbyking.com/hobbyking/stor ... light.html



en choisissant air parcel et j ai utilisé l option 30% du prix sur la facture.

188 dollar avec fdp

Ensuite j'ai commandé ces pièces en allemagne, pour être sûr d'éviter la douane:

http://www.hobbyking.com/hobbyking/stor ... duct=31102

6 * http://www.hobbyking.com/hobbyking/stor ... oduct=9304

6 * http://www.hobbyking.com/hobbyking/stor ... duct=37045

326 dollar avec les frais de port


j'en suis deja à 514 dollar

et pour ma troisième commande j'ai prévu :

http://www.hobbyking.com/hobbyking/stor ... uracy.html

http://www.hobbyking.com/hobbyking/stor ... ag%5F.html

http://www.hobbyking.com/hobbyking/stor ... FCard.html

http://www.hobbyking.com/hobbyking/stor ... FBARO.html

http://www.hobbyking.com/hobbyking/stor ... et%5F.html

http://www.hobbyking.com/hobbyking/stor ... tr%5F.html

http://www.hobbyking.com/hobbyking/stor ... BLACK.html

http://www.hobbyking.com/hobbyking/stor ... BLACK.html

http://www.hobbyking.com/hobbyking/stor ... 5FRed.html

http://www.hobbyking.com/hobbyking/stor ... 5FRED.html

http://www.hobbyking.com/hobbyking/stor ... 5FRED.html

http://www.hobbyking.com/hobbyking/stor ... BLACK.html

http://www.hobbyking.com/hobbyking/stor ... Black.html

http://www.hobbyking.com/hobbyking/stor ... 5FRed.html

http://www.hobbyking.com/hobbyking/stor ... NUINE.html

http://www.hobbyking.com/hobbyking/stor ... NUINE.html

http://www.hobbyking.com/hobbyking/stor ... CB%5F.html

3 * http://www.hobbyking.com/hobbyking/stor ... en%5F.html

3 * http://www.hobbyking.com/hobbyking/stor ... ed%5F.html

http://www.hobbyking.com/hobbyking/stor ... tr%5F.html

http://www.hobbyking.com/hobbyking/stor ... tr%5F.html

http://www.hobbyking.com/hobbyking/stor ... tr%5F.html

http://www.hobbyking.com/hobbyking/stor ... tr%5F.html

http://www.hobbyking.com/hobbyking/stor ... tr%5F.html


177 dollar sans frais de port 1049g


Qu'en pensez vous??
OK 9387000012 - UBLOX LEA-6H GPS Module w/Built-in Anten.. $51.95 28
OK 402000001 - Gyro / Flight Controller Mounting Pad (1.. $1.95 14
OK TR_PC - TURNIGY BESC Programming Card $6.95 50
OK 9387000016 - HKPilot Mega V2.5 Flight Controller USB/.. $74.04 39
OK 258000011 - 10CM Male to Male Servo Lead (JR) 26AWG .. $4.75 28
OK WHS-5MM-RED - Turnigy 5mm Heat Shrink Tube - RED $0.35 19
OK B14A707-06 - Turnigy Pure-Silicone Wire 14AWG (1mtr) .. $1.19 40
OK B16A483-06 - Turnigy Pure-Silicone Wire 16AWG (1mtr) .. $0.99 29
OK R16A483-06 - Turnigy Pure-Silicone Wire 16AWG (1mtr) .. $0.99 29
OK R14A707-06 - Turnigy Pure-Silicone Wire 14AWG (1mtr) .. $1.19 40
OK R12A1062-06 - Turnigy Pure-Silicone Wire 12AWG (1mtr) .. $2.02 50
OK B12A1062-06 - Turnigy Pure-Silicone Wire 12AWG (1mtr) .. $2.02 50
OK B18A150-08 - Turnigy Pure-Silicone Wire 18AWG (1mtr) .. $1.02 62
OK R18A150-08 - Turnigy Pure-Silicone Wire 18AWG (1mtr) .. $0.61 31
OK 601Ax5 - Male XT60 connectors (5pcs/bag) GENUINE $1.77 29
OK 601Bx5 - Female XT60 connectors (5pcs/bag) GENUIN.. $2.66 29
OK 9171000180 - Hobbyking Multi-Rotor Power Distribution.. $1.99 19
OK 017000060 - 10x4.5 SF Props 2pc Standard Rotation/2 .. $9.42 180
OK 017000061 - 10x4.5 SF Props 2pc Standard Rotation/2 .. $9.42 180
OK WHS-6MM-RED - Turnigy 6mm Heat Shrink Tube - RED $0.35 19
OK WHS10-BLACK - Turnigy Heat Shrink Tube 10mm BLACK (1mt.. $0.79 23
OK WHS10-RED - Turnigy Heat Shrink Tube 10mm RED (1mtr) $0.79 23
OK WH-5MM-BLACK - Turnigy 5mm Heat Shrink Tube - BLACK (1m.. $0.36 19
OK WH-6MM-BLACK - Turnigy 6mm Heat Shrink Tube - BLACK (1m.. $0.35 19
TOTAL: $177.92 1049g




Boscam 5.8GHz Diversity Receiver 7.0 Inch TFT LCD Monitor for FPV 800x480 LED Backlight = $159.99



1x #323000047/31102 SIX Glass Fiber Hexcopter Frame 600mm (DE Warehouse) = $42.94
6x #TR_P40A/9304 TURNIGY Plush 40amp Speed Controller (DE Warehouse) = $149.70
6x #NTM3536A-910/37045 NTM Prop Drive Series 35-36A 910Kv / 350W (DE Warehouse) = $115.44

Re: Projet en cours: multirotor

Posté : 11 juin 2013, 09:39
par chamois06
Bonjour,
Il est tradition de commencer par se présenter quand on arrive sur le forum.
viewforum.php?f=42
Juste une remarque sur les moteurs bien trop puissants et lourds, sur mon hexa j'ai des moteurs de 56g 180W amplement suffisant.
De même les contrôleurs sont trop gros et surtout pas adaptés : il faut des modèle acceptant de travailler en 400hz, ceux qui tu as choisi travaillent en 100hz, avec des moteurs plus petits des 20A (comme j'utilise) sont suffisant et plus légers.
Tu peux trouver des idées sur cette discussion que j'ai crée lors du démarrage de mon projet hexa:
viewtopic.php?f=50&t=48466
Pierre